Pax Racing

Pax Racing Woman Tank Top Slim FitColor GraySizes Small , Medium , Large..

PW50 Ceramic Motor and Rear End Bearing Kit ( 8 Bearings )The kit comes with two rear-wheel bearings, two crank-shaft bearings, two drive pinion, and a bearing for a clutch-shaft...

PW 50 Front Wheel BearingsYear all 2 Bearings in kit..

PW50 / CRF110 Pax Racing Oil Fill CapColors                Part # Red            PAX-PW50-OFC/RBlack         PAX-PW50-OFC/KBlue          PAX-PW50-OFC/B..

PW50 10" Front or Rear Stainless Spoke and Nipple Kit ****Must be used with QT50 hubs and 10" rim..

PW50 Alum base gasket -00002..

PW50 AMA Stock Package*Motor and Rearend Assembly completely disassembled.*All bearings replaced with higher quality, "stock legal" bearings.*All bearing bores are measured for proper press fit dimensions and adjusted if necessary*OEM Complete Seal and Gaskets installed*Cylinder is checked and match..

PW50 Crank Light Journals 2mm Narrower than stock, for less case Pressure.Part #PAX-PW50-AMC..

PW50 Pax Racing AMA Motor / Drive Shaft Bearing Kit Kit Contains8 Bearings..

Pax Racing 60cc PW50 kit comes complete with the Yamaha head reshaped, Yamaha cylinder bored to a 60cc, comes with Pax Racing piston kit (Piston, rings, clips, pin) Yamaha head gasket, base gasket, needle bearing and spark plug ..

PW50 Pax Racing Billet Drive Shaft CoverColor                Part #Black       PAX-PW50-RHC/KBlue         PAX-PW50-RHC/B****For an additional $25 you can have your name and number engraved...

PW50 Pax Racing Billet Foot Peg Set Kit Contains L/R Foot Pegs with Spikes and 5 spare spikesYear's  AllColor's                           Part #   Blue              ..

PW50 Pax Racing Billet Rear Brake Lever Perch for aftermarket 3/4" or 19mm handlebars. CNC'd machined and all stainless steel hardware made in the USA ..

PW50 Pax Racing Billet Stator Cover  Colors                     Part #Blue             PAX-PW50-BSC/B Black           PAX-PW50-BSC/BK ..

PW50 Pax Racing Clutch Cover Dowel Pin Set help take a little drag off the motor by giving a little more room for the clutch cover and clutch shaft more room rather than bind when installing the cover. Year'sAllPart #PAX-PW50-CCDK..

PW50 Pax Racing Drive Shaft ToolPart #PAX-PW50-OPS/T..

PW50 Pax Racing Fork Riser Kit is best used with our non oem taper steering bearings rather than having to lower your fork in the clamp this will allow it to sit the height the bike is and spacer the oil tank as well and get the full front suspension travel. AMA Approved to use in limited with our t..

PW50 Pax Racing Frame Grip TapeColor's               Part #Black          PAX-PW50-FGT/K   Red            PAX-PW50-FGT/RBlue           PAX-PW50-FGT/B..

PW50 Pax Racing Frame Gusset kit is weld on tabs in the middle and or Front head tube of your frame to help keep it from bending as they do very easily Contains2 Gusset ..